Accessories for lithium batteries
The most common problem after switching to lithium is not knowing how much runtime is left: lead-acid "warned you" by losing power, lithium does not. Daly remote displays, Victron Energy precision monitors and conversion kits solve exactly this: the operator sees charge level, consumption and remaining runtime, and the conversion from lead-acid is done once and for all. All in stock, shipped together with the battery.
Remote display
Daly rectangular display
The simplest way to know how much energy is left on board: an LCD screen to be fitted wherever needed — on the dashboard, on the control panel, next to the battery — connected by its own cable to the battery BMS. It switches on with a button, shows the data and switches off by itself: the draw on the battery is negligible.
- What it shows — state of charge (SOC), voltage, current, temperature and charge/discharge status, updated in real time.
- Operation — push-button activation and automatic switch-off after a few seconds of inactivity: very low consumption.
- Construction — sealed, moisture-protected electronics, designed for use on board vehicles and installations.
- Connection — dedicated cable to the communication port of the battery BMS.
Manufacturer data from Daly. Tell us the LI TECH battery model when you enquire: we will confirm compatibility and the correct wiring.
Remote display
Daly round display
Same information, dashboard format. The Daly round display is flush-mounted in a circular hole — like an on-board instrument — and turns battery status into an instant reading: charge percentage clearly visible in the centre, voltage below. It is the cleanest choice on tillers, dashboards and control panels where space is limited.
- What it shows — state of charge (SOC) as a percentage and battery voltage, always in view.
- Mounting — compact circular flush-mount format, integrated into the panel like an on-board instrument.
- Operation — push-button activation and low consumption, like the whole Daly display family.
- Connection — dedicated cable to the communication port of the battery BMS.
Manufacturer data from Daly. Mounting hole and wiring confirmed at enquiry stage, according to the battery model.
Precision monitor
Victron BMV-702
The energy accounting of the system: the BMV-702 measures everything that flows into and out of the battery through the included 500 A shunt and turns it into hard data — how much energy you have used, how much is left, how much longer it will last. With the auxiliary input you can also keep an eye on a second battery (for example the starter battery) or the temperature of the bank.
- Measures — voltage, current, power, amp-hours consumed, state of charge (%) and remaining runtime.
- Shunt included — 500 A / 50 mV, with 10 m RJ12 cable in the box.
- Auxiliary input — voltage of a second battery, temperature or bank midpoint.
- Power supply — 6,5 to 95 V DC: covers 12 V and 24 V systems without additional accessories.
- Alarms and relay — programmable visual and audible alarm, 60 V / 1 A relay to drive loads or signalling.
- Front panel — 69 × 69 mm, IP55 protection; VE.Direct port for connection to a PC and Victron accessories.
Specifications from the official Victron Energy BMV-700 series datasheet.
Conversion
Lead-acid → lithium retrofit kit
Switching to lithium is not just a matter of changing the battery: charger, cabling and fixings have to be the right ones. The LI TECH retrofit kit brings together everything needed to replace a lead-acid battery with an LFP Series LiFePO₄ monobloc battery — made up to measure according to the machine and the original battery, so the conversion is done once, and done properly.
- Made to measure — the contents are defined on your machine: battery model, matching charger, connection accessories.
- Dedicated battery charger — from the LI TECH 12 V and 24 V range, sized to the battery capacity.
- A single point of contact — battery, kit and technical documentation arrive together, from the same supplier.
We prepare the kit based on the machine data: tell us the application and the current battery in your message.
Which accessory for your battery?
Tell us the LI TECH battery model — or the machine it will be installed on — and we will indicate the correct display, monitor and cabling, with availability and prices.